25-Amp Brushless ESC w/Governor Mode, 5V BEC w/EC3



*at participating retailers

Find a Retailer


Buy It Now


  • Governor Mode (governor speed controller, slow down system)
  • Small and compact PCB design for ease of installation
  • Large heatsink for great thermal performance
  • Ultra smooth motor start design to run with all kinds of brushless motors
  • The throttle has more than 200 steps resolution that provides great controlling sense
  • Users can use the transmitter to operate the motor setting by Super stylized CPU
  • If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by tuming off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers.


Continuous Maximum Current:
Input Voltage:
5.5V - 16.8V
Momentary Peak Current:
1.8 in (45mm)
0.9 in (24mm)
0.4 in (11mm)
0.81 oz (23g)

Parts & Accessories

Used In...   (See All)

The "25-Amp Brushless ESC w/Governor Mode, 5V BEC w/EC" is used in the following:


Technical Notes

Supporting motor types: 2 poles to 10+poles in/outrunner brushless motors
Supporting maximum RPM: 2poles=>190,000rpm
Supporting battery types: Li-ion/ LiPo 2-4 cells, NiMH 6-12 cells
BEC output: Max current 2A