Micro CPLR Brushless Outrunner Motor with CF Tube



*at participating retailers

Find a Retailer


Buy It Now


Endorsed by F3A world champion Christophe Paysant Le-Roux, these outrunner motors provide maximum power and minimum weight—a power- to- weight ratio, in fact, far above existing direct-drive motors in the range. For instance, the smallest of the group, the Nano, weighs just 15 grams, but can turn an 8-inch prop and deliver 50 watts with a 2-cell Li-Po pack.


Brushless Outrunner
Bearings or Bushings:
Ball Bearings
Recommended Prop Range:
8x6 to 9x4.7 (for 2S Li-Po); 7x4 to 8x4.3 (for 3S Li-Po)
RPM/Volt (Kv):
Resistance (Ri):
.250 ohms
Idle Current (Io):
.46A @ 6V
Maximum Burst Current:
10A (100 watts)
2S-3S Li-Po
Speed Control:
8-10A Brushless
25g (0.9 oz)
Overall Diameter:
26mm (1.0 in)
Shaft Diameter:
Built-in Prop Saver
Overall Length:
30mm (1.2 in)

Parts & Accessories

Completion Guides Recommended Electronics and Accessories   (See All)

These are the recommended accesories for most applications.

  • 10-Amp Pro Brushless ESC

  • Carbon Fiber Tube, 6", 8mm OD, 1/4" ID

Used In...   (See All)

The "Micro CPLR Brushless Outrunner Motor with CF Tube" is used in the following: