Products

Carbon-Z Yak 54 3X PNP

[EFL10575]

$299.99

*at participating retailers

Find a Retailer

Or

Buy It Now

Required to Complete

- 6+ channel, full-range transmitter and receiver radio system
- 14.4V 4S 2800-3200mAh LiPo flight battery
- Charger for flight battery

Manuals

The improved E-flite® Carbon-Z® 3X features upgraded electronics, lightweight CA hinges and strength enhancements to withstand the next generation of aggressive 3D flying styles.

The E-flite® Carbon-Z® Yak 54 3X airplane is an exciting evolution of material and technology. An array of improvements have been made to give this model a definitive edge in performance over the groundbreaking original. Beginning with the latest in Carbon-Z construction, the entire airframe features strength enhancements that increase its durability and the ability to withstand aggressive 3D maneuvers better than ever. At the same time, engineering enhancements allowed the low wing loading and 2-to-1 power to weight ratio to be maintained. The proven E-flite 25-size outrunner motor now uses an improved ESC that features a more robust BEC so the complement of upgraded digital servos can consistently deliver peak precision. Even its propeller has been refined to deliver greater efficiency and smoother power.

The CA hinged control surfaces feature serviceable hardware with ball-links installed. The landing gear has been made slightly taller so that you can takeoff more easily from grass and perform Harrier landings with less risk to the propeller. The two-piece wings feature a carbon fiber joiner tube and bolt into place with a single socket-head screw each. Multiple access hatches with magnetic and mechanical latch closure allow easy access and quick battery changes. The original Mirco Pecorari trim scheme provides definitive attitude recognition while cockpit details, pilot figure and tinted canopy give the model a distinctive scale appearance.

Whether you’re an intermediate park pilot looking for a performance upgrade, or a 3D hotshot, the E-flite Carbon-Z Yak 54 3X is ideal. This aircraft is ready for your favorite full-range, 6-channel radio, 4S Li-Po battery and required Li-Po balance charger. For precision and agility without equal, be sure to choose the recommended Spektrum™ 6-Channel AS3X® Sport receiver (SPMAR635)—sold separately.

Features

  • Easy to complete, final assembly
  • Improved Carbon-Z® structure that's lighter and stronger
  • CA hinged control surfaces with control links installed
  • High-output, 25-size, 1000Kv brushless Q-Power system installed
  • E-flite® 60-Amp Pro Switch-Mode BEC Brushless ESC V2 installed
  • Digital high-speed, metal gear mini servos installed
  • Vibrant, Mirco Pecorari original trim scheme
  • Plug-in wings and stabilizers
  • Cockpit details, pilot figure and tinted canopy
  • Smoother running, E-flite V2 propeller included
  • Taller landing gear for easier takeoff and Harrier landings
  • Multiple access hatches with magnetic and mechanical latch closure

Specifications

Wingspan:
48.0 in (1220mm)
Overall Length:
48.5 in (1230mm)
Wing Area:
525 sq. in. (34.0 sq. dm.)
Flying Weight:
3.75-3.9 lb (1.7-1.76 kg)
Motor Size:
25-size 1,000Kv brushless outrunner (installed)
Radio:
6+ channel radio system required
Wing Loading:
13.8 oz/sq ft (45 g/sq dm)
Speed Control :
60-amp swich-mode BEC brushless ESC (installed)
Recommended Battery:
14.8V 4S 2800mAh 30C LiPo battery (required)
Flaps:
No
Retracts:
No
Control Throw (Ailerons):
Low: 37mm up/down, 10% expo; High: 70mm up/down, 45% expo
Control Throw (Elevator):
Low: 19mm up/down, 10% expo; High: 75mm up/down, 40% expo
Control Throw (Rudder):
Low: 65mm right/left, 10% expo; High: 110mm up/down, 40% expo
Approx. Flying Duration:
5 minutes
Minimum Age Recommendation:
14 years
Experience Level:
Intermediate
Recommended Environment:
Outdoor
Assembly Time:
Less than 1 Hour
Is Assembly Required:
Yes
Prop Size:
12 x 5.25 (included)
CG (center of gravity):
4.02 in (102mm) back from the leading edge of wing at wing root

Parts & Accessories

Completion Guides Recommended   (See All)

  • 2800mAh 4S 14.8V 30C LiPo, 12 AWG EC3

  • 6-Channel AS3X Sport Receiver

  • DX8 Transmitter Only MD2

  • TP610C-ACDC 1-6 Cell LiPo AC/DC Charger w/Balancer

Parts Listing   (See All)

  • Wheel Pants: Yak 54 C-Z

  • Pushrods w/Clevis: Yak 54 C-Z

  • 12 x 5.25 Electric Prop: C-Z Yak 54 AS3X

  • 13g Digital Micro Servo

Optional Accessories   (See All)

  • LiPo Charge Protection Bag, Large

  • Passport UltraForce 200W AC/DC Charger

  • Power Meter

  • Li-Po Cell Voltage Checker

Videos

Photos

 

 

 

 

 

 

 

 

 

Support

Warranty

1 Authorized Warranty Period (Date of Purchase)

What this Warranty Covers 
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship at the date of purchase.

2 Authorized Limited Warranty & Limits of Liability International

What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.

Law
These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.


WARRANTY SERVICES

Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call 877.504.0233 toll free to speak to a Product Support representative.

Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/_service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/content/_service-center_render-service-center.

ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.

United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822


Please call 877-504-0233 or e-mail us at productsupport@horizonhobby.com with any questions or concerns regarding this product or warranty.

United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby Limited 
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at sales@horizonhobby.co.uk with any questions or concerns regarding this product or warranty.

Germany:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Technischer Service
Christian-Junge-Strasse 1
25337 Elmshorn
Germany

Please call +(0) 49 4121 2655 100 or e-mail us at
service@horizonhobby.de with any questions or concerns regarding this product or warranty.

France:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby SAS
11 Rue Georges Charpak
77127 LIEUSAINT

Please call +33 (0) 1 60 18 34 90 or e-mail us at
infofrance@horizonhobby.com with any questions or concerns regarding this product or warranty.

China:                                                                                           Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby – China
Room 506, No. 97 Changshou Rd.
Shanghai, China 200060

Please call +86 (021) 5180 9868 or email us at info@horizonhobby.com.cn with any questions or concerns regarding this product or warranty.

 



 

Modified: 11/13/2012

Articles