Products

Mini Ultra Stick ARF

[EFL2250]

$119.99

*at participating retailers

Find a Retailer

Or

Buy It Now

Required to Complete

Brushless Motor
Brushless ESC
4+ Ch Radio
4 Sub-micro Servos
Servo Extensions & Y-harness
4 to 6-Ch Receiver
Li-Po Battery
Li-Po Charger
CA
Propeller

Manuals

Set-Ups

Extremely Versatile and An Absolute Blast to Fly - Ideal for those making the transition from electric trainers, or any RC pilot looking for a spirited sport plane that goes together fast.

Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stick’s fun factor are two firewall options that let you use a wide variety of motor sizes, types and brands. This along with the ample clearance for larger props that its tall, lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.

Features

  • Perfect transitional airplane for advancing pilots who want to learn aerobatics and for sport flyers who want easy comfortable sport flyer
  • 95% factory-built; get flying in 2 hours or less
  • Lightweight balsa and plywood construction
  • Two firewall options to use a variety of motor sizes, types & brands
  • Includes molded firewall stick mount
  • Control surfaces have factory-installed hinges and control horns
  • Bolt-on tail requires no gluing and secures with two lock nuts
  • Optional quad-flap configuration
  • Tough, lightweight aluminum landing gear that's factory-assembled and tall enough to accommodate larger prop sizes
  • Covered in genuine Hangar 9 UltraCote
  • Great match for E-flite Park 450 Outrunner Brushless Motor
  • Easy access top battery hatch
  • Design based on Hangar 9’s popular line of Ultra Sticks

Specifications

Wingspan:
38.75 in (985mm)
Overall Length:
34 in (865mm)
Wing Area:
325 sq in (21 sq dm)
Flying Weight:
22 - 25 oz (625 - 710g)
Motor Size:
Park 400 Inrunner or Park 450 Outrunner
Radio:
4-channel or greater (7-channel for quad flaps)
Servos:
4 sub-micros (6 sub-micros for quad flaps)
Trim Scheme Colors:
UltraCote Fluourescent Blue, Flame Red, Transparent Red & White
CG (center of gravity):
2.50 in (63mm) behind the leading edge
Prop Size:
10x7 - 11x7
Hardware Included:
Yes
Speed Control :
20A Brushless
Recommended Battery:
2100 mAh 3-Cell 11.1V Li-Po
Flaps:
Yes (optional)
Control Throw (Ailerons):
1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate
Control Throw (Elevator):
9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate
Control Throw (Rudder):
7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate
Approx. Flying Duration:
10-20 minutes
Scale:
Park Flyer
Approx. Assembly Time:
1-2 hours
Gear Ratio:
6.5:1 when using Park 400 Brushless Inrunner

Parts & Accessories

Completion Guides Sport Outrunner Setup   (See All)

This is a sport flyer setup for smooth and stable flights.

  • 20-Amp Brushless ESC (V2)

  • Park 450 Brushless Outrunner Motor, 890Kv

  • 10 x 8 Electric Propeller

  • 2100mAh 3 Cell 11.1V LiPo, 16 Gauge

Completion Guides High Power Setup (using gearbox)   (See All)

Propper throttle management is required when using high performance setups. Using this setup with 3 cells will give your plenty of power for zippy flights.

  • Micro Rubber Spinner

  • Spinner, 1-3/4", Red

  • 20-Amp Brushless ESC (V2)

  • Park 400 Brushless Inrunner Motor, 4200Kv

Completion Guides Quad Flap Setup   (See All)

You may wish to install optional quad flaps, in which case you will need a 7-channel radio and receiver on 72 MHz with mixing and six sub-micro servos.

  • 7.5-Gram Sub-Micro S75 Servo

  • Standard Switch with Charge Cord

  • R700 7 Channel FM Slimline 72MH

  • 12-inch Servo Extension

Completion Guides Required Electronics and Common Accessories   (See All)

Electronics and common accessory items used with all power system options - some items may vary when using quad flap option (see separate listing).

  • Park Flyer Tool Assortment, 5 pc

  • EC3 Device & Battery Connector

  • Celectra 80W AC/DC Multi-Chemistry Battery Charger

  • 7.5-Gram Sub-Micro S75 Servo

Parts Listing   (See All)

  • Wing with Ailerons:Mini UltraStick

  • Fuselage:Mini UltraStick

  • Tail Set:Mini UltraStick

  • Pushrod Set:Mini UltraStick

Optional Accessories   (See All)

  • Tail Wheel with Retainers, 1/2", Micro (2)

  • Power Meter

  • Micro Rubber Spinner

  • Gear Puller: 1mm-5mm Shaft

Support

Detailed Information

The Mini Ultra Stick can be assembled and ready for flight in just 1 to 2 hours thanks, to:

 

-         Preinstalled control surfaces and hinges

-         Preinstalled control horns

-         Preinstalled pushrods

-         Bolt-on horizontal and vertical stabilizers

-         Preassembled landing gear with wheels attached

 

Bulletins

You must use a separate BEC or an onboard receiver battery pack when utilizing the quad flap option due to the higher number of servos used in the aircraft and higher current load.  Brushless speed controls are not rated to handle more than four servos under load.  Please consult the brushless speed control instructions for details and how to disable the BEC on your speed control.

Replace with a separate BEC, such as the UBEC, available from www.koolflightsystems.com or use a separate 4.8V receiver battery pack.

 

For your convenience, the Mini Ultra Stick features pre-installed pushrod tubes.  If you are experiencing any issue with the pushrods sticking and do not have a free movement of the rods, please use an X-acto to open up the ends of the tubes.  The tubes were cut at the factory and in some cases crimped from the cutting process.  You should check this when you install your pushrods.

Warranty

1 Authorized Warranty Period (Date of Purchase)

What this Warranty Covers 
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship at the date of purchase.

2 Authorized Limited Warranty & Limits of Liability International

What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.

Law
These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.


WARRANTY SERVICES

Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call 877.504.0233 toll free to speak to a Product Support representative.

Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/_service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/content/_service-center_render-service-center.

ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.

United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822


Please call 877-504-0233 or e-mail us at productsupport@horizonhobby.com with any questions or concerns regarding this product or warranty.

United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby Limited 
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at sales@horizonhobby.co.uk with any questions or concerns regarding this product or warranty.

Germany:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Technischer Service
Christian-Junge-Strasse 1
25337 Elmshorn
Germany

Please call +(0) 49 4121 2655 100 or e-mail us at
service@horizonhobby.de with any questions or concerns regarding this product or warranty.

France:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby SAS
11 Rue Georges Charpak
77127 LIEUSAINT

Please call +33 (0) 1 60 18 34 90 or e-mail us at
infofrance@horizonhobby.com with any questions or concerns regarding this product or warranty.

China:                                                                                           Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby – China
Room 506, No. 97 Changshou Rd.
Shanghai, China 200060

Please call +86 (021) 5180 9868 or email us at info@horizonhobby.com.cn with any questions or concerns regarding this product or warranty.

 



 

Modified: 11/13/2012

Articles