Sukhoi SU-26MM ARF (2 Boxes) *



*at participating retailers

Find a Retailer


Buy It Now


The full-scale SU-26 is a very potent single-seat aerobatic aircraft considered by many as one of the best acrobatic planes in the world. The Sukhoi is famously known for its acrobatic prowess.

Sukhois have emerged as a family of superior aerobatic airplanes, allowing pilots to use them for world-class aerobatics competitions and exhibition shows. The majority of international contestants enter unlimited aerobatics competitions with Sukhoi airplanes, and numerous competitors have captured international aerobatic championships. Characterized by its round cowl, the Sukhoi demonstrates superior acceleration and rate-of-climb performance, excellent controllability, high level of permissible g-loads, an all-round field of view from the cockpit and unsurpassed structural integrity.

The Hangar 9 Sukhoi SU-26MM is capable of a limitless display of extreme 3D aerobatics. Designed by world-class competition pilot and designer Mike McConville, the new Sukhoi SU-26MM is constructed from durable, lightweight balsa and plywood and covered with a vibrant UltraCote® trim scheme which gives it an electric fierce look .

What sets this world-class scale aerobatic plane apart is the completely optimized design that makes this a true precision and 3D aerobatic performer. With numerous tweaks to the entire design, the 97-inch, 85cc SU-26MM masters unsurpassed precision maneuvers and excellent visual presentation. Strong rudder authority provides extreme yaw, while the absence of rudder coupling means virtually no mixing is needed for this model. The Sukhoi has low wing loading and also has exceptional aileron authority at all speeds—enabling the plane to roll fast even in extreme 3D high alpha. Using an 85cc gas engine, the SU-26MM is a high-powered scale aerobatic performer. And, due to its lightweight engineering, only one high-torque servo per aileron is needed, whereas most models this size require two.

The level of completion of the Sukhoi SU-26MM ARF is beyond comparison in the giant-scale market. Most of the high-quality Hangar 9 giant-scale hardware is included, and even installed, equaling a great assembly time savings for the modeler. The kit comes highly prefabricated with the fuel tank, hinges and control horns installed and hinge lines sealed, so you don't have to wait long to get flying. Other top-quality, durable components include a fiberglass cowl and lightweight aluminum landing gear. It also comes ready to accept canister exhaust systems. And to top it all off, a very lightweight fiberglass, helmeted pilot figure painted to perfectly match the vibrant trim scheme is included.

Other smart design features include a two-piece wing and stab that ensures convenient storage and easy transport to and from the flying field.


  • Vibrant, modern UltraCote® trim scheme
  • Only one high-torque servo required per aileron
  • Plug-in 2-piece wing and stab
  • Hangar 9 giant-scale hardware included
  • Factory-painted, lightweight fiberglass, helmeted pilot figure
  • Comes highly prefabricated and factory-hinged with control horns and fuel tank installed
  • Hinge lines come already sealed
  • Lightweight, durable aluminum landing gear
  • Sleek-looking fiberglass cowl
  • Designed by world-class aerobatic pilot Mike McConville
  • Perfect match for the DA 85 gas engine


97 in (2464mm)
Overall Length:
91.14 in (2315mm)
Wing Area:
1762 sq in (114 sq dm)
Flying Weight:
21.5–24 lb (9.75–10.89 kg)
Engine Size:
58–85cc gas
Motor Size:
6 channels
6 hi-torque 180 ounces of torque (7 if using 2 servos on the rudder)
Trim Scheme Colors:
Pearl Blue (HANU845), Silver(HANU881), White (HANU870) & True Red (HANU866) Bright Yellow (HANU872)
Wing Loading:
28–31.5 oz per sq ft
Prop Size:
24 x 10 to 27 x 10
Spinner Size:
4–5 in (100–125mm)
Hardware Included:

Parts & Accessories

Completion Guides Recommended Electronics and Accessories   (See All)

  • Evolution 3 Wire Ignition/RX Switch

  • Fuel Dot Filler with "T" Coupler

  • RF Filter: Ring Style (2)

  • Servo Extension 12-inch Heavy-Duty, Gold

Completion Guides Large Gas Aerobatic   (See All)

  • Evolution 3 Wire Ignition/RX Switch

  • Evolution 80GX (4.9) Gas Engine

  • Pro Fuel Filter: Gas, Glow

  • Extra Receiver Pack 2500mAh 4.8v NiCd Flat

Parts Listing   (See All)

  • Sukhoi SU-26 85cc Fuselage with Hatch

  • Sukhoi SU-26 85cc Left Wing Panel with Aileron

  • Sukhoi SU-26 85cc Right Wing Panel with Aileron

  • Sukhoi SU-26 85cc Left Stabilizer with Elevator

Optional Accessories   (See All)

  • Fuel Dot Filler with "T" Coupler

  • Pro Fuel Filter: Gas, Glow

  • Sky Writer Smoke Pump System, 6V

Building Tools   (See All)

  • Digital Servo and Receiver Current Meter

  • AnglePro 4-in-1 Digital Throw/Incidence Meter

Pit/Field Equipment   (See All)

  • Micro Digital Tachometer

  • Digital Variable Load Voltmeter



The factory-painted,...

Made from lightweight...

One of the keys to the SU-...

Thanks to its lightweight...



1 Authorized Warranty Period (Date of Purchase)

What this Warranty Covers 
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship at the date of purchase.

2 Authorized Limited Warranty & Limits of Liability International

What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations.


Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.

These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.


Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at, submit a Product Support Inquiry, or call 877.504.0233 toll free to speak to a Product Support representative.

Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website

ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.

United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822

Please call 877-504-0233 or e-mail us at with any questions or concerns regarding this product or warranty.

United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby Limited 
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at with any questions or concerns regarding this product or warranty.

Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Technischer Service
Christian-Junge-Strasse 1
25337 Elmshorn

Please call +(0) 49 4121 2655 100 or e-mail us at with any questions or concerns regarding this product or warranty.

Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby SAS
11 Rue Georges Charpak

Please call +33 (0) 1 60 18 34 90 or e-mail us at with any questions or concerns regarding this product or warranty.

China:                                                                                           Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby – China
Room 506, No. 97 Changshou Rd.
Shanghai, China 200060

Please call +86 (021) 5180 9868 or email us at with any questions or concerns regarding this product or warranty.



Modified: 11/13/2012