Products

Hangar 9 P-40B Warhawk 50 ARF, .46-.55

[HAN2595]

$99.99

*at participating retailers

Find a Retailer

Or

Buy It Now

Manuals

The P-40B Warhawk 50 from Hangar 9 is a sport scale warbird that offers great details and additional options to increase its level of realism.

On December 7, 1941, the surprise attack on Pearl Harbor decimated the bulk of the U.S. air forces before they could even get off the ground.  Still, a handful of American fighter pilots managed to make it to their planes and get into the fight.  Among them were U.S. Army Air Corps lieutenants Ken Taylor and George Welch.  After a harrowing drive from their barracks to Haleiwa Field, during which they were repeatedly strafed, the duo commandeered two P-40B Warhawks and flew into action against almost 200+ aircraft.

According to most accounts, Taylor and Welch shot down six Japanese attackers before returning to base to refuel and rearm.  For their bravery and skill in the face of such insurmountable odds, both were awarded the Distinguished Flying Cross; the Air Corp's highest honor.  Since then, their amazing story has been immortalized in countless books and two blockbuster Hollywood films.

The Hangar 9 P-40B Warhawk is a tribute to these pilots that comes out of the box covered in the trim scheme of the two fighters that flew from Haleiwa Field that fateful morning. Two decal sets are included so you can finish the trim scheme with the specific markings of either plane.

Features

  • Top quality balsa/light plywood construction
  • Genuine UltraCote covering
  • One-piece, bolt on wing
  • Authentic 1941 U.S. Army Air Corp trim scheme
  • Decals for two Warhawks that fought at Pearl Harbor
  • Painted fiberglass cowl with exhaust and inlet details
  • Spinner with cutouts for two- or three-blade props
  • Simulated wing guns with cooling shroud detail
  • Top hatch access to internally mounted switches and electronics
  • All hardware included

Specifications

Wingspan:
55.5 in (141 cm)
Overall Length:
47.8 in (121 cm)
Wing Area:
530 sq. in. (34.2 sq. dm.)
Flying Weight:
6.75 - 8.00 lb (3.10 - 3.60 kg)
Engine Size:
2-stroke .46-.55, 4-stroke .72-.82, gas 4-stroke 14cc
Motor Size:
Power 52
Radio:
4+ channel radio system; 5+ channels required for optional retract operation
Servos:
5 standard servos (4 standard servos for EP)
Trim Scheme Colors:
UltraCote Olive Drab (U904), Gray (U882), Black (U874)
CG (center of gravity):
2-3/8 to 2-7/8 in (60-73mm) back from the leading edge of the wing at wing root
Prop Size:
Evolution .52: 11 x 6; Saito .82: 14 x 6; Power 52: 15 x 7
Speed Control :
80-Amp
Recommended Battery:
18.5V 5S 5000mAh 30C Li-Po
Flaps:
No
Retracts:
Optional
Control Throw (Ailerons):
Low: 7/16 in (11mm) up, 9/32 in (7mm) down; High: 13/16 in (20mm) up, 11/16 in (17mm) down
Control Throw (Elevator):
Low: 7/16 in (11mm) up/down; High: 11/16 in (18mm) up/down
Control Throw (Rudder):
Low: 1-3/16 in (30mm) right/left; High: 2 in (51mm) right/left
Minimum Age Recommendation:
14 years
Experience Level:
Intermediate
Recommended Environment:
Outdoor
Assembly Time:
10-15 Hours
Is Assembly Required:
Yes

Parts & Accessories

Completion Guides 2-Stroke Glow   (See All)

  • Pitts Muffler: 40NT,EVO52NX,60NX

  • Evolution Propeller 11x6

  • Evolution .52NX Engine with Muffler

  • Fuel Filler with "T" & Overflow Fitting

Completion Guides 4-Stroke Glow   (See All)

  • Exhaust Deflector: .35 to .90 Engines

  • Evolution Propeller 14x6

  • Fuel Filler with "T" & Overflow Fitting

  • Muffler Right Angle Manifold M12 65-100 FG14/82

Completion Guides Radio Equipment   (See All)

  • Evolution 3 Wire Ignition/RX Switch

  • Receiver Pack 2500mAh 6V NiMH

  • Standard Servo Extension 6"

  • AR8000 8-Channel DSMX Receiver

Completion Guides 2-stroke Gas   (See All)

  • Evolution Propeller 10x6

  • Evolution Propeller 12x6

  • Evolution Propeller 13x6

  • 10cc (.60 cu in) gas RC engine

Completion Guides Electric Setup   (See All)

  • Thin Elec Prop 15X7E

  • 80-Amp Pro Switch-Mode BEC Brushless ESC, EC5 (V2)

  • 5000mAh 5S 18.5V 30C LiPo, 10AWG EC5

  • Prop Adapter, 8mm Shaft: Power 46/60

Completion Guides Retracts   (See All)

  • 25-46 100 Degree Rotating Electric Retracts

  • Standard Servo Extension 6"

Parts Listing   (See All)

  • Engine Mount: Corsair 50

  • Fuselage w/Hatch: P-40B 50 ARF

  • Fuselage Hatch: P-40B 50 ARF

  • Complete Wing Assembly: P-40B 50 ARF

Optional Accessories   (See All)

  • Celectra 80W AC/DC Multi-Chemistry Battery Charger

  • 25-46 100 Degree Rotating Electric Retracts

  • 2-& 4-Cycle Super Glow Plug

  • Blue Block After Run Oil Dispenser 20cc

Videos

Photos

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Support

Warranty

1 Authorized Warranty Period (Date of Purchase)

What this Warranty Covers 
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship at the date of purchase.

2 Authorized Limited Warranty & Limits of Liability International

What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.

Law
These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.


WARRANTY SERVICES

Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call 877.504.0233 toll free to speak to a Product Support representative.

Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/_service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/content/_service-center_render-service-center.

ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.

United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822


Please call 877-504-0233 or e-mail us at productsupport@horizonhobby.com with any questions or concerns regarding this product or warranty.

United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby Limited 
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at sales@horizonhobby.co.uk with any questions or concerns regarding this product or warranty.

Germany:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Technischer Service
Christian-Junge-Strasse 1
25337 Elmshorn
Germany

Please call +(0) 49 4121 2655 100 or e-mail us at
service@horizonhobby.de with any questions or concerns regarding this product or warranty.

France:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby SAS
11 Rue Georges Charpak
77127 LIEUSAINT

Please call +33 (0) 1 60 18 34 90 or e-mail us at
infofrance@horizonhobby.com with any questions or concerns regarding this product or warranty.

China:                                                                                           Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby – China
Room 506, No. 97 Changshou Rd.
Shanghai, China 200060

Please call +86 (021) 5180 9868 or email us at info@horizonhobby.com.cn with any questions or concerns regarding this product or warranty.

 



 

Modified: 11/13/2012

Articles