Products

785HB Sail Winch Servo

[HRC33785S]

$49.99

*at participating retailers

Find a Retailer

Or

Buy It Now

Manuals

Hitec's HS-785HB Sailboat Sail Winch Servo

The HS-785HB sail winch servo with it's large drum wheel has 3 1/2 revolutions of travel for hauling in even the largest of sails. With its dual ball bearing supported output shaft the HS-785HB will provide years of reliable service.

Features

  • Dual Ball Bearing Supported Output Shaft
  • Large Drum Wheel
  • Perfect replacement winch servo for the Pro Boat Ragazza
  • *** Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail

Specifications

Size Category:
Specialty
Type:
Analog
Application:
Sail winch
Torque:
153 oz-in (11.0kg-cm) @ 4.8V; 183 oz-in (13.2kg-cm) @ 6V
Speed:
1.68 sec/60 deg @ 4.8V; 1.38 sec/60 deg @ 6V, at no load
Length:
2.32 in (59.0mm)
Width:
1.14 in (29.0mm)
Height:
1.97 in (50.0mm)
Weight:
3.88 oz
Bushing Or Bearing:
Bearing
Bearing:
Dual
Motor Type:
3 Pole
Connector Type:
Universal
Gear Material:
Karbonite
Current Draw Idle:
8mA
Current Draw Stall:
1500mA @ 4.8V; 1800mA @ 6V
Voltage:
4.8V to 6.0V
Deadband:
5µs

Parts & Accessories

Used In...   (See All)

The "Sail Winch HS-785HB: Universal" is used in the following:

  • Ragazza 1 Meter Sailboat RTR

Support

Detailed Information

Technical Notes

Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs.

Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.