Products

Winner of RC Car Action's Editors' Choice Award for 2009 Car of the Year, as well as Readers' Choice for Nitro Buggy. ROAR National Champion - 2007, 2008, 2009

The 1/8-scale 8IGHT 2.0 4WD Buggy Race Roller features over thirty revisions and improvements to the revolutionary 8IGHT buggy chassis. The 8IGHT 2.0 Buggy proved to be the fastest buggy in qualifying by taking Top Qualifying honors at the 2008 IFMAR 1/8 Buggy World Championships.

The chassis on the 8IGHT 2.0 has been extended an additional 2mm to provide increased stability and speed. The chassis’ Tuned Flex Technology provides significant handling gains by responding precisely to changes in the terrain without sacrificing balance and grip. Steel chassis droop stops have also been added to ensure consistent down stop settings.

The 8IGHT 2.0 includes updated steering geometry which features a servo saver with increased consistency. Additional gains in steering precision were made by incorporating a pressed-steel bushing in the Ackerman brace, which reduces friction over the entire range of motion. The suspension on the 8IGHT 2.0 allows for customization with numerous shock mounting locations, two camber link positions on the front carrier and four on the rear.

A revised radio tray on the 8IGHT 2.0 optimizes the position of the servos, while increasing response time and reducing stress on the throttle servo. The Sure-Close fuel tank ensures positive closure and prevents air from entering the fuel system.

The 8IGHT 2.0 features high-quality 7075 aluminum shock towers that reduce weight for improved on-track performance without sacrificing handling or strength. The dogbones and outdrives of the 8IGHT 2.0 feature improved steel materials to withstand the abuse of competitive racing. The rear hub design incorporates an updated inner camber link, a revised shock tower and simplified camber locations and the durability of 3.5mm outer rear hinge pins.

The rear gear box on the 8IGHT 2.0 has the capability to shim the rear ring gear from the pinion to ensure ultra free drivetrain. Also included on the  8IGHT 2.0 is a left-side keyed insert to improve durability.

Features

  • Extended chassis with Tuned Flex Technology (TFT) 2.0
  • Radio tray design optimizes the position of the servos
  • Heavy-duty rear outer hinge pins
  • Updated steering geometry and servo saver
  • Sure-Close fuel tank closure
  • Lightened shock towers
  • Extended rear driveshaft
  • Redesigned suspension geometry
  • Heavy-duty dogbones and outdrives
  • Reinforced rear bearing insert system
  • Heavy-duty brake disks
  • Laser etched engine mounting guides
  • Center driveshaft grease boots
  • EFRA approved fuel line kit

Specifications

Type:
Competition Buggy Race Roller
Scale:
1/8
Length:
19.56 in (497mm)
Width:
12.13 in (308mm)
Wheelbase:
12.71 - 12.87 in (323 - 327mm)
Chassis:
Tuned Flex Technology 2.0
Drivetrain:
4WD
Kit/RTR:
Race Roller
Body:
Clear Polycarbonate Buggy

Parts & Accessories

Completion Guides Basic   (See All)

Losi recommends the following items for the 1/8 8IGHT 2.0 Buggy Race Roller

  • "Buggy" .21 Mach 2

  • Metered Glow Driver with 2600mAhNi-MH & Charger

  • 8IGHT/8IGHT-T 2.0 Starter Box

  • 7.4V 2000mAh 2S LiPo Receiver Pack: 1/8

Completion Guides Convert to Brushless Power   (See All)

To convert your 8IGHT 2.0 to electric brushless power you will need: Losi's Electric Conversion Hardware Kit (LOSA0912), an Xcelorin Brushless System (LOSB9556 or LOSB9557) and a 3-5-cell LiPo Battery (LOSB9834 or LOSB9864).

  • 8IGHT Electric Conversion Kit Hardware Package

Included   (See All)

  • Suspension Balls 6.8mm: 8B 2.0

  • Fuel Tank Cap, Spring & Seal: 8B 2.0

  • Fuel Tubing (24")

  • Fuel Line Clips (4)

Parts Listing   (See All)

  • Socket Head Cap Screws, 2-56 x 1/2

  • Front Suspension Arm Bushings:8B,8T

  • F/R CV Driveshaft Coupling Set: 8B,8T

  • Center FR CV Driveshaft Assy.: 8B

Optional Accessories   (See All)

  • Metered Glow Driver with 2600mAhNi-MH & Charger

  • Deluxe Nitro Starter Kit

  • Silicone Diff Fluid, 2000CS

  • Silicone Diff Fluid, 3000CS

Hop-Ups   (See All)

  • "Buggy" .21 Mach 2

  • Dynamite Platinum .28XP

  • Front/Rear HD Lightened Outdrive Set (2): 8B, 8T

  • Center HD Lightened Differential Outdrives (2)

Used In...   (See All)

The "1/8 8IGHT 2.0 4WD Buggy Race Roller" is used in the following:

Videos

Photos

 

 

 

 

 

The 8IGHT 2.0 chassis has...

 

 

 

 

The high-quality 7075...

Improving on the 8IGHT’...

The radio tray on the 8IGHT 2....

Every second counts on race...

With the increased horsepower...

The 8IGHT 2.0 features a new...

 

 

 

 

 

 

 

 

 

Support

Warranty

Team Losi Racing Limited Liability Warranty

What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.

Law
These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.


WARRANTY SERVICES

Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call 877.504.0233 toll free to speak to a Product Support representative.


Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/_service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements

For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/content/_service-center_render-service-center.

ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.

United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822


Please call 877-504-0233 or e-mail us at productsupport@horizonhobby.com with any questions or concerns regarding this product or warranty.

United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby Limited
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at sales@horizonhobby.co.uk with any questions or concerns regarding this product or warranty.

Germany:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Technischer Service
Christian-Junge-Strasse 1
25337 Elmshorn
Germany

Please call +(0) 49 4121 2655 100 or e-mail us at
service@horizonhobby.de with any questions or concerns regarding this product or warranty.

France:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby SAS
11 Rue Georges Charpak
77127 LIEUSAINT


Please call +33 (0) 1 60 18 34 90 or e-mail us at
infofrance@horizonhobby.com with any questions or concerns regarding this product or warranty.


China: Electronics and engines requiring inspection or repair should be shipped to the following address:


Horizon Hobby – China
Room 506, No. 97 Changshou Rd.
Shanghai, China 200060


Please call +86 (021) 5180 9868 or email us at info@horizonhobby.com.cn with any questions or concerns regarding this product or warranty.









Modified: 11/13/2012

1 Authorized Warranty Period (Date of Purchase)

What this Warranty Covers 
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship at the date of purchase.

Articles