Products

1/5 5IVE-T 4WD Off-Road Truck White Bind-N-Drive

[LOSB0019WHTBD]

$1,599.99

*at participating retailers

Due Mid September, 2014

Find a Retailer

Or

Buy It Now

Manuals

Set-Ups

Bigger. Faster. Stronger. The 1/5-scale Losi® 5IVE-T® 4WD Off-Road Racing Truck is the closest thing to a full-size vehicle in realism, performance and experience. It features a 4WD drivetrain based on the racing- and award-winning 8IGHT™ buggy platfrom, Spektrum™ telemetry receiver, installed sensors and 1/4-scale servos. And since it's a Bind-N-Drive™ vehicle, you complete it with the DSM® transmitter of your choice. There's really nothing like driving an RC truck as big as this. Come take it for a spin in all its 4WD glory.

These large-bore threaded, aluminum shocks feature oversized 7mm shock shafts designed to stand up to the punishment of 1/5-scale action. The threaded adjusters allow for fine-tuning of the ride you are looking to achieve. The extra high volume of fluid is essential in controlling the suspension movement over the roughest terrain. (Far right: 1/5-scale and a standard 1/10-scale shock shaft.)

This is no ordinary chassis. It is based on the award-winning, race-proven 8IGHT platform. It has been designed to produce the best performance possible. The chassis plate is constructed of 5mm aircraft-grade aluminum and has been machined to save weight and add strength to provide extreme durability.

To ensure a long engine life and proper care, the air and fuel systems are served by a two-stage filtering system. The air must pass through two different foam filters designed to block as much dust and debris as possible while still maintaining proper flow. The fuel system features a secondary filter that serves multiple purposes. One, to keep the fuel pickup in the gas mix no matter the orientation of the vehicle and as a filter to block larger debris, and a secondary bullet style filter to catch anything else.

The engine comes preinstalled with a high-volume muffler and features an electronic ignition, easy-to-adjust carburetor with a built-in choke and fuel primer. An added bonus are the machined oval inserts that match the chassis cutouts precisely to locate the engine for proper gear mesh.

The finned aluminum clutch mount adds strength and durability and provides unmatched heat dissipation for increased longevity of the 8,000 rpm clutch. Since it is enclosed, it prevents dirt and debris from entering and fouling the parts. The oversized bearings handle greater loads and are more reliable.

The throttle servo performs more than just throttle duties, as it is also the main source for braking power. This heavy-duty large-scale servo has the power to bring the 5IVE-T to a stop, thanks to the functionality of the bias adjustable dual-disk brakes. No 1/10-scale throttle servos here.

The core of the electronics system is the SR3300T receiver that is powered by Spektrum 2.4GHz DSM technology and has telemetry built in. The 5IVE-T comes prewired with sensors for engine temperature, speed and receiver battery voltage. Just add a surface DSM transmitter like the Spektrum DX3S, and all of this information will be transmitted back to the driver for real-time vitals of the 5IVE-T.

These monster wheels are true beadlock wheels with rings on both the inner and outer bead of the tire. With the amount of power the 5IVE-T produces and the sheer size of these tires, these wheels will provide a stable platform for the all-terrain tires. Many popular 1/5-scale tires will mount right on these beadlock wheels.

The 5IVE-T uses nothing but precision-cut or -formed, heat-treated steel gears throughout the drivetrain. No plastic gears. These are the strongest and most durable type of gears available and would be expensive option items on other models.

The realistic cage provides added durability to the assembly, absorbing impacts as well as providing a solid base for the modular body. The unique design allows the body and cage to be removed with only four screws and four body clips in seconds.

The individual four-piece body panels can be replaced in the event that they become damaged, so an entire body does not need to be purchased to get the vehicle back to the factory look. Clear panels and stickers are sold separately to create your own look or retain the factory schemes.

Features

  • Large-bore shocks with 7mm shafts & threaded adjusters
  • 5mm chassis with CNC machining for strength and less weight
  • Two-stage air and fuel filter systems
  • Powerful Losi® 2-stroke 26cc gasoline engine
  • 1/4-scale heavy-duty throttle servo for superior braking
  • Adjustable bias dual-disk braking system
  • 1/4-scale high torque metal gear steering servo
  • Extra-large 800cc fuel tank
  • Spektrum™ SR3300T telemetry receiver with 2.4GHz DSM® technology
  • Three tunable, sealed viscous differentials
  • Multi-piece beadlock off-road wheels
  • Impact-absorbing bumpers
  • Innovative sealed clutch mount with cooling fins
  • CV driveshafts used throughout
  • 6V 3000mAh receiver battery and charger
  • Officially licensed

Specifications

Type:
4WD short course truck
Scale:
1/5
Length:
38 in (965.2mm)
Width:
20.75 in (527mm)
Height:
12.25 in (311.1mm)
Ground Clearance:
2 in (50.8mm)
Wheelbase:
24 in (609.6mm)
Weight:
38 lbs (17.2 kg)
Chassis:
5mm thick 7075 T6 aluminum
Suspension:
4-wheel independent
Drivetrain:
4WD with 3 silicone fluid differentials & centrifugal clutch
Tire Type:
Off-road all-terrain performance, high-wear
Motor or Engine:
26cc gas
Radio:
BND - Spektrum™ 3300T telemetry receiver
Batteries:
3000mAh 6V NiMH receiver pack
Charger:
Global AC charger
Wheel Size:
4.75 in (120.6mm)
Kit/RTR:
RTR
Shock Type:
24mm diameter oil-filled with compensation bladders
Body:
4-piece, short course truck
Ball Bearings:
Throughout, including steering
Fuel Tank Capacity:
800cc
Minimum Age Recommendation:
14 years
Experience Level:
Advanced
Recommended Environment:
Outdoor
Is Assembly Required:
No

Parts & Accessories

Completion Guides Recommended Transmitters   (See All)

  • DX3R PRO 3-Channel Racing System

  • DX4C DSMR 4-Channel Radio w/ SR410

Included   (See All)

  • 26cc Hi-Performance Engine 5IVE-T

  • RPM Sensor

  • Head Temperature Sensor-Long Lead

  • SR3300T DSM 3-Ch Rx w/Telemetry: Surface

Parts Listing   (See All)

  • Speedpack 6V 3000mAh NiMh 5C Flat Receiver Pack:5T

  • HD Ring & Pinion Grease (10ml): 5IVE-T, MINI WRC

  • F&R Chassis Brace & Spacer Set: 5IVE-T

  • Sway Bar Set & Hardware(3 ea.F&R):5IVE-T, MINI WRC

Optional Accessories   (See All)

  • 7.4V 5200mAh 2S 15C LiP0: ROSS

  • 2 Cycle Oil, 100cc: 5IVE-T

  • Screw Kit: Losi 5ive-T

  • Bearing Kit: Losi 5ive-T

Hop-Ups   (See All)

  • Billet Machined Front Skid Plate, Slv; Losi 5ive-T

  • 18T Pinion Gear, 1.5M & Hardware: 5IVE-T,MINI WRC

  • Titanium Turnbuckle Set (6): 5IVE-T

  • Titanium Turnbuckles 6x112mm (2): 5IVE-T

Videos

Photos

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Support

Bulletins

5IVE-T Product Bulletin
It has come to our attention that a small quantity of the 5IVE-T trucks were assembled with a shorter than correct length screw to attach the front gear box/skid plate. Before operating your 5IVE-T please remove and check the two front most 6mm flathead screws from the bottom of the chassis and confirm they are ¾”/20mm long. If they are not please call Losi Service @  (909) 390-9595 Ext. 300 and you will be sent the longer screws. Under no circumstances should you operate the 5IVE-T with the shorter screws. We apologize for this error and thank you for your help correcting it.

Click Here to view images

Warranty

1 Authorized Warranty Period (Date of Purchase)

What this Warranty Covers 
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship at the date of purchase.

Losi Limited Liability Warranty

What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.

Law
These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.


WARRANTY SERVICES

Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call 877.504.0233 toll free to speak to a Product Support representative.


Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/_service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date.
Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost.
By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website http://www.horizonhobby.com/content/_service-center_render-service-center.

ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.

United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822


Please call 877-504-0233 or e-mail us at productsupport@horizonhobby.com with any questions or concerns regarding this product or warranty.

United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby Limited
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at sales@horizonhobby.co.uk with any questions or concerns regarding this product or warranty.

Germany:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Technischer Service
Christian-Junge-Strasse 1
25337 Elmshorn
Germany

Please call +(0) 49 4121 2655 100 or e-mail us at
service@horizonhobby.de with any questions or concerns regarding this product or warranty.

France:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby SAS
11 Rue Georges Charpak
77127 LIEUSAINT


Please call +33 (0) 1 60 18 34 90 or e-mail us at
infofrance@horizonhobby.com with any questions or concerns regarding this product or warranty.


China: Electronics and engines requiring inspection or repair should be shipped to the following address:


Horizon Hobby – China
Room 506, No. 97 Changshou Rd.
Shanghai, China 200060


Please call +86 (021) 5180 9868 or email us at info@horizonhobby.com.cn with any questions or concerns regarding this product or warranty.









Modified: 11/13/2012

Articles