ShockWave 36 RTR



*at participating retailers

Find a Retailer


Buy It Now

Required to Complete

Blue Thunder™ 20% Fuel (quart)
500cc Fuel Bottle or
Fast Tap Quart Bottle Spout
Glow Plug Wrench 
Ni-Cd Glow Driver 
12 “AA” alkaline batteries (8 for the transmitter and 4 for the receiver)
Clear tape to seal radio box


The Shockwave 36 is a blazing fast deep-V that measures 36 inches in length. Powered by an included engine and controlled by a JR radio system, this boat comes pre-assembled.

Measuring over three feet in length, the Pro Boat ShockWave 36 is a ready-to-run deep-vee speedster that can reach speeds up to 35 mph. The power comes from the installed Dynamite .32 Marine engine. The Dynamite .32 Marine is water-cooled and comes equipped with a convenient pull-starter and high performance tuned exhaust system. Control is provided by JR's trusty Python radio system that offers drivers analog adjustment of steering rates as well as throttle and steering trim.

The ShockWave's workmanship is equally impressive. The hull is professionally built from fiberglass and painted with the same technologies used in todays automotive finishes. Rubber motor mounts significantly reduce vibration and lengthen the hull’s life. There are no plastic parts on this boat. All the running hardware is stainless steel and aluminum, including the adjustable trim tabs that let drivers adjust the "ride" for varying wave conditions. Anti-skid fins, an oversized rudder and an adjustable strut for the Prather prop add even more ride-tuning options.

This is high-octane RC offshore excitement at its best.


  • Prather propeller
  • Stainless steel and aluminum running hardware
  • JR Python radio system
  • Water-cooled Dynamite .32 Marine engine w/ pull-start
  • Pre-painted fiberglass hull
  • Speeds of up to 35 mph
  • Completely ready-to-run


36 in.
9 in.
Engine Size:
.32 water-cooled Marine
6.25 lbs.
30 m.p.h.
2 channel
Hull Material:
Trim Scheme Colors:
Prop Size:
1.90x3.0 in.
Hull Type:
Drive System:
Flex shaft
Tuned pipe

Parts & Accessories

Completion Guides Basic   (See All)

  • Metered Glow Driver with 2600mAhNi-MH & Charger

  • Fast Fill Fuel Bottle, 500cc

  • Blue Thunder Sport 20%, Quart

  • Nitro Wrench

Included   (See All)

  • .32 Marine Inboard Engine

  • Boat Stand: SW36

Parts Listing   (See All)

  • Heavy Duty Flex Cable: SW36,TC31

  • Engine Mount: SW36, TC31

  • Vibration Dampener: SW36, TC31

  • Manifold: SW36



The High-quality, long...

The high-quality Prather...

Trim tabs allow more handling...

The high-performance Dynamite...

The anti-skid fins keep the...

The sealed radio box keeps...


Technical Notes

To increase speed on calm water, bend the trim tabs up 1/4 to 1/2 inch with a pair of pliers. This will lift the front of the hull out of the water at high speeds, lower hull resistance and increase speed. This may however lessen the cornering ability. The trim tabs can also be adjusted individually to level the boat and compensate for engine and propeller torque. You can also increase top speed by removing the anti-skid fins, but you may experience reduced stability in rough conditions.