ShockWave 26 Brushless RTR



*at participating retailers

Find a Retailer


Buy It Now

Required to Complete

4 AA Batteries
Battery Pack


Pro Boat's ShockWave 26 Brushless with built-in Spektrum technology

The ShockWave 26 Brushless RTR from Pro Boat provides RC boating enthusiasts with an affordable, Li-Po compatible, brushless deep-V speedboat. In addition to these power-packed features, this speed demon comes RTR and includes Spektrum technology allowing users to take full advantage of Spektrum technology enjoying interference-free operation and providing additional options with regard to transmitter selection. Included with the RTR is Pro Boat's 2.4GHz radio system with built-in Spektrum technology. Not only do you get the quality and performance that Pro Boat is known for, you also get a high-performance, brushless deep-V that includes a programmable ESC that can be used with nickel or lithium polymer battery packs, a water-cooled brushless motor, a sealed inner hull liner keeping your electronics dry as well as tuneable running gear allowing users to make performance adjustments based on water and wave conditions. In addition the model comes with three sets of decals allowing you to customize the looks with the color and design of your choice.


  • Includes Pro Boat 2.4GHz radio system with built-in Spektrum technology
  • 3 trim scheme colors included - Trim Scheme is customizable
  • Water-cooled brushless motor - durable, low maintenance and high performance
  • Tunable running gear to aid performance on various water conditions
  • Steerable drive system with skid fins for improved cornering capabilities
  • Sealed inner hull keeps vital electronics dry
  • Water-cooled Electronic speed control with reverse requires only one 7.2v NiMH or one 7.4V LiPo


26 in (660mm)
7.5 in (191mm)
Motor Size:
ProBoat 2.4GHz Spektrum Marine DSM
Speed Control:
Water-cooled 30A. 5.6-12.5V Brushless ESC W/ REV:
Hull Material:
Trim Scheme Colors:
Orange, Blue and Yellow (all included)
Prop Size:
1.34" X 2.06" Composite Propeller
Hull Type:
7.2V NiMH Flat w/ Deans or 7.4V LiPo 25C w/ Deans
Drive System:
Steerable w/ skid fins

Parts & Accessories

Completion Guides Recommended   (See All)

  • Passport AC/DC LiPo Charger 6S

  • Prophet Sport LiPo 25W AC Charger

  • Speedpk Platinum 7.4V5200mAh2S 50C LiPo Case:Deans

  • Fuji AA Alkaline Battery (4)

Included   (See All)

  • Pistol-Grip Transmitter Only 2.4

  • MR200 Marine 2.4GHz 2-Ch Sport Receiver

Parts Listing   (See All)

  • Propeller, Comp, 1.34x1.5x1/8 shaft

  • Water Outlet & Nut: SW36, TC31

  • 3mm Prop Nut

  • Nylon Propeller Washer: 8x3x1.5mm

Optional Accessories   (See All)

  • Pro Boat Clear Flexible Tape

  • Propeller, SS, 1.34 x 1.5 x 1/8 shaft

  • 7.2V 5100mAh NiMH Battery w/Deans Connector



The ShockWave comes with the...

Shown with included 2.4GHz 2-...



The skid fins work with the...

The ShockWave 26 Brushless...

Accessing the ShockWave's...

All the electrical components...

The ShockWave 26 Brushless...






Horizon is recommending that all owners of the Shockwave 26 Brushless RTR upgrade the stock plastic propeller to Pro Boat’s stainless steel propeller (PRB0154).  Horizon is providing upgraded propellers (PRB0154) to all customers at no charge.


If you would like an updated propeller for your Shockwave 26 Brushless please review and follow the instructions below.

  • Click here for the propeller request form with instructions.
  • Horizon will pay for all ground shipping within the United States and Canada.
  • Consumers outside the US and Canada should contact their local retailer or distributor. International distributors may be found here.
  • You may also e-mail the Horizon Hobby Product Support team. Please put "Shockwave 26 Propeller Request" in the subject line and include your shipping address and daytime phone number. Click here to email product support.
  • If you have any questions, you can call Horizon Hobby Product Support at 877-504-0233

Technical Notes

Please note: The included decal sheet is taped to the inside of the box top.


1 Authorized Warranty Period (Date of Purchase)

What this Warranty Covers 
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship at the date of purchase.

2 Authorized Limited Warranty & Limits of Liability International

What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations.


Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.

These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.


Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at, submit a Product Support Inquiry, or call 877.504.0233 toll free to speak to a Product Support representative.

Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon’s Terms and Conditions found on our website

ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.

United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822

Please call 877-504-0233 or e-mail us at with any questions or concerns regarding this product or warranty.

United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby Limited 
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at with any questions or concerns regarding this product or warranty.

Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Technischer Service
Christian-Junge-Strasse 1
25337 Elmshorn

Please call +(0) 49 4121 2655 100 or e-mail us at with any questions or concerns regarding this product or warranty.

Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby SAS
11 Rue Georges Charpak

Please call +33 (0) 1 60 18 34 90 or e-mail us at with any questions or concerns regarding this product or warranty.

China:                                                                                           Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby – China
Room 506, No. 97 Changshou Rd.
Shanghai, China 200060

Please call +86 (021) 5180 9868 or email us at with any questions or concerns regarding this product or warranty.



Modified: 11/13/2012