Products

FG-36 (220G) with Muffler/Ignition/MM: AK

[SAIEG36]

$749.99

*at participating retailers

Find a Retailer

Or

Buy It Now

Manuals

The first Saito™ gas-powered 4-stroke engine.

The RC industry’s most reliable manufacturer of top-quality glow 4-stroke engines introduces its first gas-powered engine, the Saito™ FG-36. This engine is the gas equivalent of the 220 glow engine in terms of size and dimensions, yet it gives you the cleaner, lower-operating cost of gas with 36cc of power. Above and beyond the advantages of a 4-stroke gas engine, this is the engine for those who like to run clean and efficient engines. Accompanied by the power and precision craftsmanship of Saito, the distinguished look and sweet sound, this is the engine many of you have been waiting for.

As an expert in reliable 4-strokes, Saito spent two years developing the best-built 4-stroke gas engine. The power-to-weight ratio of a Saito creates a one-of-a-kind flying experience. For serious modelers, the long awaited arrival of a high-quality, powerful and precision craftsmanship gas engine is here.

The Saito electronic ignition system requires the use of a 4.8–6.0 volt battery for proper operation. A capacity of 1000 mAh or more is recommended.

Features

  • 4-stroke gas engine from one of the top RC brands
  • 36cc displacement rivals similarly-sized 2-strokes
  • Includes ignition, muffler, Walbro carb and engine mount
  • Built for the utmost in reliability and performance
  • Brings Saito experience to gas enthusiasts
  • Comparable in power to Saito™ FA-220 glow 4-stroke
  • Available in traditional silver case

Specifications

Type:
4-stroke gasoline engine
Displacement:
2.20 cu in (36cc)
Bore:
35mm (1.49 in)
Stroke:
32mm (1.26 in)
Cylinders:
Single
Total Weight:
62.3 oz (1746g): engine, mount, muffler, and ignition
Engine (Only) Weight:
44.2 oz (1252g)
Muffler Weight:
3.0 oz (85g)
Crankshaft Threads:
8 x 1.25mm (Step up is 10mm)
Benchmark Prop:
APC 18 x 6W @ 8,300 rpm
Prop Range:
18-19 in x 8-9 in ; 20 x 8 in (Bolly or Mejzlik)
RPM Range:
1,700 to 9,000
Fuel:
Gas oil mix of 20:1 (20:1 is recommended for break in and continuous operation).
Mounting Dimensions:
7 x 2 5/8 x 6 5/16 in (124 x 85 x 173mm)
Muffler Type:
Cast
HP:
3.5
Cylinder Type:
Ringed
Starting System:
Saito ignition 4.8 - 6V (capacity more than 1,000mAh)
Carb Type:
Walbro/Saito
Crank Type:
Ball bearing

Parts & Accessories

Parts Listing   (See All)

  • M5 Nut for Spinner:100-220a,AZ

  • Rubber Bush P Rod Cover(U):120-220a,AZ,BP

  • Pushrod: AD,AE,BP

  • Pushrod Cover & Rubber Seal: AD, AE

Optional Accessories   (See All)

  • Red Valve Covers 220A & G36 AD,AE, AK

Photos

 

 

 

 

 

Support

Warranty

1 Authorized Warranty Period (Three Year)

What this Warranty Covers:
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship for a period of 3 years from the date of purchase.

3 Authorized Limited Warranty & Liability JRP, JSP

What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer or (vi) Product not compliant with applicable technical regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASERS INTENDED USE.

Purchasers Remedy
Horizons sole obligation and purchasers sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASERS SOLE AND EXCLUSIVE REMEDY.

Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase.

Law
These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice.


WARRANTY SERVICES

Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call 877.504.0233 toll free to speak to a Product Support representative.
Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/_service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.

NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office.

Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date.
Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost.
By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizons Terms and Conditions found on our website http://www.horizonhobby.com/content/_service-center_render-service-center.

ATTENTION: The sale, warranty and service of JR products distributed by Horizon is limited to the geographic regions of North America, Central America, South America, and the Caribbean. JR products distributed by Horizon cannot be purchased in other regions and may not be compliant with applicable regulations. If non-compliant product is received by Horizon for service, it will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender’s choice and at the sender’s expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.

United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822


Please call 877-504-0233 or e-mail us at productsupport@horizonhobby.com with any questions or concerns regarding this product or warranty.

 

 

Modified: 11-13-2012

Articles