Products

"Truggy" .26 Mach 2 with Pull/Spin Start

[DYN0990]

$139.99

*at participating retailers

Find a Retailer

Buy It Now

Parts Listing

	Cylinder Head Screw (4): DYN.21 (DYN6000)	$1.99
	Wrist Pin Clips (2): DYN .21 (DYN6007)	$1.99
	Collet: DYN .21 (DYN6010)	$2.99
	Front Bearing (7X19X6): DYN .21 (DYN6011)	$13.99
	Rear Bearing (13X24X6): DYN .21 (DYN6012)	$24.69
	Carburetor Return Post Set: DYN .21 (DYN6013)	$6.99
	High Speed Needle Valve: DYN .21 (DYN6019)	$7.99
	High Speed Needle Holder: DYN .21 (DYN6020)	$7.99
	High Speed Needle Washers: DYN .21 (DYN6021)	$1.99
	Fuel Inlet Nipple: DYN .21 (DYN6022)	$6.99
	Idle Speed Screw: DYN .21 (DYN6023)	$2.99
	Throttle Barrel Boot: DYN .21 (DYN6027)	$7.99
	Carb Ball Link/Ball End: DYN .21 (DYN6028)	$9.99
	O-Ring Set: DYN .21 (DYN6029)	$7.99
	Combo Pull/Spin Start Assm: DYN .21 (DYN6034)	$20.42
	PS Backpalte/Shaft/One-Way:DYN .21 (DYN6035)	$19.99
	Pull/Spin-Start Backplate Screw Set (4) (DYN6036)	$1.99
	Pull/Spin-Start One-Way Bearing: DYN .21 (DYN6037)	$13.99
	Cylinder Head: Mach 2 .26 (DYN6050)	$44.99
	Head Button: Mach 2 .26 (DYN6051)	$13.99
	Head Shim .1mm: Mach 2 .26 (DYN6052)	$2.99
	Head Shim .2mm: Mach 2 .26 (DYN6053)	$2.99
	Piston/Sleeve: Mach 2 .26 (DYN6054)	$68.39
	Wrist Pin: Mach 2 .26 (DYN6055)	$3.99
	Connecting Rod: Mach 2 .26 (DYN6056)	$41.39
	Crankcase: Mach 2 .26 (DYN6057)	$62.99
	Crankshaft: Mach 2 .26 (DYN6058)	$80.99
	Carburetor: Mach 2 .26, .28 (DYN6059)	$43.19
	Carburetor Body: Mach 2 .26, .28 (DYN6060)	$21.84
	Throttle Barrel: Mach 2 .26, .28 (DYN6061)	$15.99
	Low Speed Needle: Mach 2 .26, .28 (DYN6062)	$13.99
	Combo Pull/Spin Start Shaft: Mach 2 .26, .28 (DYN6063)	$2.99