Pro Boat Blackjack 24\" V2 Features
\n- \n
- Incredible styling and extreme 4S performance with 45+ MPH speeds \n
- High-quality Spektrum radio and electronics \n\t\t\t\t\t
- Ready to run — just add battery and charger \n\t\t\t\t\t
- Heat Wave inspired bright and wild race livery option \n\t\t\t\t\t
- Vegas offshore racing inspired Blackjack livery option \n\t\t\t\t\t
- Fast, easy SSL (Strap, Slide, Lock) battery installation \n
- \n
- Prop strut with easy-to-use “grease and go” bushing system \n
- Damage-resistant break away rudder \n\t\t\t\t\t
- Dual IC5 connector holders \n\t\t\t\t\t
- Water-resistant receiver box \n\t\t\t\t\t
- Adjustable, all aluminum hardware \n
![\"SSL](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_01.jpg\"\n)
\n SSL (STRAP, SLIDE, LOCK) BATTERY INSTALLATION
\nNo more struggling to lock down batteries in your boat hull’s limited space. The Blackjack 24” catamaran’s SSL (Strap, Slide, Lock) system makes battery installation fast and hassle-free. Swapping out batteries is also quick and painless — you can be done and back on the water in just seconds.
\n![\"“GREASE](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_02.jpg\"\n)
\n\n “GREASE AND GO” PROP STRUT
\nThe Blackjack 24” catamaran has a “grease and go” system that passes grease through the prop strut and stuffing tube into the bushing where it’s needed. Just remove the plug screw from the rear of the prop strut, inject a few pumps of grease, and seal it back up. It’s quick and easy!
\n![\"EXTREME](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_03.jpg\"\n)
\n EXTREME BRUSHLESS PERFORMANCE
\nLike its 42” long “big brother,” the ready-to-run Blackjack 24” catamaran is designed for serious brushless performance. The boat comes equipped for 4S LiPo power right out of the box. Just install the recommended batteries and you'll hit speeds over 45mph right out of the box!
\n![\"BREAK](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_04.jpg\"\n)
\n\n BREAK AWAY RUDDER
\nAny RC boat is bound to have an accident eventually. When it happens, the rudder is usually the first part to bend or break. But the break away rudder of the Blackjack 24” catamaran is designed to swing out if it strikes a solid object. That keeps it from breaking off of the hull and minimizes damage to the rudder itself. You don’t even need to replace screws. Just push the rudder back into place and tighten it up!
\n![\"SUMMER](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_420x265.jpg\"\n)
\n SUMMER HEAT OR VEGAS STREETS\n
\nHit the water with your choice of head-turning styles. The Pro Boat Blackjack 24” catamaran comes in two awesome livery options, both expertly applied and inspired by full-scale racing favorites.
\n \t![\"HEAT](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_05.jpg\"\n)
\n HEAT WAVE VISUAL LIVERY
\nBright and wild, the Heat Wave inspired race livery option guarantees you’ll get noticed as you rip up the shoreline. Take it out on the water and turn up the summer heat!
\n![\"BLACKJACK](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_06.jpg\"\n)
\n BLACKJACK LIVERY
\nHitting the water with this offshore racing inspired Blackjack livery option is almost as exciting as being on a power boat Poker Run — and finishing with a royal flush.
\n![\"DUAL](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_07.jpg\"\n)
\n\n DUAL IC5 CONNECTOR HOLDERS
\nThe dual, hard mounted IC5 connectors work together with the SSL (Strap, Slide, Lock) system to simplify battery installation. You can easily slide your batteries into place and plug them in with one hand. The connectors also keep the wires secure and safe from potential hazards.
\n![\"CLEAN](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_08.jpg\"\n)
\n\n CLEAN COMPOSITE INTERIOR
\nThe design of the Blackjack 24” catamaran’s composite hull provides for a clean interior that keeps every wire, cooling line, and part right where it should be.
\n![\"WATER](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_09.jpg\"\n)
\n WATER RESISTANT RECEIVER BOX
\nWhen you’re running on water, chances are good a small amount will get into the hull. Spektrum receivers are water resistant, but the exposed pins that accept servo leads are susceptible to connection issues if they do become wet. The Blackjack 24” catamaran includes a receiver box that locks out moisture and keeps this critical component safe and dry.
\n![\"ADJUSTABLE](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_10.jpg\"\n)
\n\n ADJUSTABLE HARDWARE
\nThe all-aluminum hardware allows you to adjust the prop strut height and angle, so you can set up the Blackjack 24” catamaran to your liking and tune the boat to the water conditions.
\n![\"SPEKTRUM](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_11.jpg\"\n)
\n SPEKTRUM SLT2 2-CHANNEL TRANSMITTER
\nThe included 2-channel SLT2 2.4GHz transmitter offers everything you need for dependable, confident control. User-adjustable features include steering and throttle trims, steering rate, and throttle limits. The control layout is amazingly intuitive — all controls are perfectly positioned to be quickly accessible when needed and out of the way when not in use.
\n![\"SPEKTRUM](\"/on/demandware.static/-/Sites-horizon-master/default/PDPImages/PRB08049_PP_12.jpg\"\n)
\n\n SPEKTRUM SMART READY
\nIt’s easy to upgrade your Blackjack 24” catamaran for Smart functionality. Telemetry capabilities are built into the included Spektrum Firma 90A Smart ESC. Pair it with your choice of Spektrum Smart radio and receiver, and the ESC can send vital telemetry to back to the radio — including RPM, voltage, cell voltages, and amperage.
\n![\"7.4V](\"https://www.proboatmodels.com/dw/image/v2/BFBR_PRD/on/demandware.static/-/Sites-horizon-master/default/dw82353d69/Images/SPM/SPMX50002S100H5_A0_Q5EJOO3C.jpg?sw=91&sh=91&sm=fit\"\n "\\"7.4V")
\n \n ![\"7.4V](\"https://www.proboatmodels.com/dw/image/v2/BFBR_PRD/on/demandware.static/-/Sites-horizon-master/default/dw09ca4c7d/Images/SPM/SPMX52S100H5_A0_9JWZJC4L.jpg?sw=91&sh=91&sm=fit\"\n "\\"7.4V")
\n \n