Features

  • Fiberglass hull with matching canopy and removable vertical fins
  • Powerful waterproof electronics
  • Dynamite® 2000Kv brushless motor
  • Spektrum DX2E 2.4GHz transmitter
  • Stainless steel two-blade propeller
  • Interference-free connection
  • Aluminum adjustable propeller strut
  • Aluminum break-away rudder
  • Stainless steel turn fin

Overview

You asked for it and now it's here-the ready-to-run Pro Boat® UL-19 30-inch Brushless Hydroplane. Its design is ultra sleek, with no turbine housing or rear spoiler. And boy is it fast-you can cruise up to speeds of 50+ mph on 6S power thanks to the 6 pole water-cooled motor and 120A ESC. A waterproof Spektrum 3KG servo lets you take corners at full speed without fear! On top of that, the UL-19, which is built to NAMBA race specifications, comes equipped with all the aluminum running gear you need and a stainless steel turn fin. This is adrenaline-pumping, heart-pounding action you won't soon forget.

Video Overview

 

Lightweight, durable fiberglass hull with matching canopy and removable vertical fins

Because the hull is lightweight and durable, you can push this hydroplane to max speeds in race condition waters. The canopy, like the hull, is constructed of hand-laid fiberglass. The vertical fins are removable and replaceable. In case of a bad crash, they will simply break away without damaging the hull.

Extreme power from waterproof electronics

The UL-19 uses a Dynamite® water-cooled 120A, 2-6S ESC that can handle more amperage than needed to run the boat with authority and speed. The new 2000Kv 6-Pole motor features a large rotor that greatly increases motor torque.

Stainless steel two-blade propeller

An aggressive boat like the UL-19 deserves an equally aggressive two-blade propeller. The UL-19's propeller lets you take full advantage of the hull's performance. It features a high-pitch, high rake stainless steel propeller that produces a tight thrust cone that results in better propulsion and higher speeds that won't overload the electronics. You'll be able to reach speeds on 4S that could only be reached on 6S by other boats.

Interference-free connection

The included Spektrum DX2E DSMR® 2.4GHz transmitter will provide a clear, precise connection while the hydroplane is on the water.

Aluminum adjustable propeller strut

Use the aluminum adjustable propeller strut to tune the boat to various water conditions, from glass smooth to windy and choppy. The square-bottom propeller strut allows more precise adjustments by acting similar to a trim tab usually found on Deep-V boats.

Aluminum break-away rudder

The aluminum rudder features a break-away design that will safeguard the transom if the hydroplane hits an immovable object on the water or runs ashore.

Stainless steel turn fin

The stainless steel turn fin will keep the boat glued to the water whether you're going straight or full throttle through a turn.

Product Specs

Receiver
Included
Drive System
Flex Shaft
Motor Size
3650 6 Pole Marine Motor 2000Kv (installed)
Product Length
30 in (762mm)
Steering
Rudder
Product Weight
5 lbs (2300g)
Hull Height
6 in (152.4mm)
Speed Control
Included
Approximate Assembly Time
No assembly required
Hull Type
Hydroplane
Scale
30 inch
Beam
16 in (406.4mm)
Trim Scheme Colors
Blue and Yellow
Completion Level
Ready-To-Run
Hull Material
Fiberglass
Propeller Size
1.7 x 1.6 (43 x 63.5mm)
Vehicle Size
Large
Radio
Included
Type
Hydroplane